Product description:
This product is used to control the LED ambient light of a TV or computer monitor with an HDMI interface. It realizes the dynamic effect of synchronously displaying the screen color or sound with the LED light strip connected to the controller, greatly enhancing the visual impact and immersive entertainment atmosphere. , automatically detects the number of LED light strips and supports multiple installation methods, compatible with all TV or monitor sizes, and supports smart APP control, AI speaker voice control, touch button control, built-in a variety of sound and light dynamic modes, and the light color is uniform Can be DIY, very flexible and easy to use.
Notice:
1. There are 6 installation methods in total, choose a suitable method to install the light strip;
2. The LED light strip must be installed according to the direction of the arrow shown in the figure. The first light strip is connected to the LED1 port and installed from bottom to top. Install the light strip on the back of the TV/display and close to the edge;
3. When one light strip is installed, LED2 can realize the atmosphere lighting of the whole house, which can be installed anywhere in the house.
First time using:
1. This product is used with an account. If you have not registered an account, you need to register an account first;
2. This product needs to be connected to a router, and it is necessary to ensure that the router can access the external network normally;
3. This product supports software control
4. Press and hold the on/off button for about 5 seconds: the controller enters the distribution network state, the red indicator light flashes quickly, and the LED appears white light to breathe;
5. Start the APP and log in to the account, and the controller will be automatically discovered, just complete the addition.
About music mode:
· This controller supports a variety of music rhythm effects and three music signal source rhythm modes, all of which can be set through the APP 1. HDMI audio decoding signal;
3.5mm line-in audio signal (headphone jack);
· Built-in MIC pickup signal.
About WiFi and Bluetooth:
This controller supports two control methods, WiFi and Bluetooth, but the network must be successfully configured when using the APP for control for the first time, and then it can be directly operated and controlled without the router network.
About AI Voice Control:
Many AI speakers are currently supported (can control on/off, brightness, color, etc.). Remarks: AI speakers are not necessary, you can purchase the corresponding brand and model according to your needs.
