The world's largest supply platform for sources of shortages and hard-to-find parts

Halley5 X2000 core board

Published Time: 2022-12-01 14:53:07
It can be widely used, such as wireless intercom, smart toys, smart gateways, smart homes, etc.

Overview:

Introduction:

The Halley5 core board is a dual-core high-performance, low-cost wireless LAN module designed for IoT devices based on the X2000 design, with a maximum frequency of 1.2GHz and an internal integrated 1Gb LPDDR3, 750MHz.

The core board also includes a 2Gb SPI NANDFlash, Wi-Fi IEEE 802.11 b/g/n/ac dual-band, Bluetooth 5.0 and Bluetooth Low Energy two-in-one module. It also provides a stamp hole interface with 144 pins for various peripheral interfaces, which can expand LCD, audio, camera, Ethernet, SD card, USB OTG, SPI, I2C, UART, PWM, NEMC, ADCs etc.

It can be widely used, such as wireless intercom, smart toys, smart gateways, smart homes, etc.

The Halley5 core board can run the latest Linux kernel and TCP/IP stack. Equipped with high-performance XBurst CPU, supports hardware floating-point unit (FPU), SIMD acceleration instructions, and supports various speech recognition, image recognition, noise reduction, echo cancellation, APE/FLAC decoding and other algorithms.

 

68146c82b961ac45bf149fea7eee382.png 

 

Halley5 function parameters

Dimensions: 38mm x52mm X 1mm

CPU operating frequency: up to 1.2GHz

Memory: 1G bits LPDDR3 (embedded X2000)

External storage: 2G bits SPI NAND Flash (compatible with SPI NOR Flash)

Wi-Fi: Dual-band Wi-Fi 802.11 b/g/n/ac

Bluetooth: Bluetooth 5.0 with BLE, 2.1 EDR

Working voltage: DC 5V

Wi-Fi and Bluetooth parameters

IEEE 802.11 b/g/n/ac dual-band radio

Bluetooth 5.0 with integrated class 1.5 PA

Concurrent Bluetooth and WLAN operation, simultaneous BT/WLAN reception with asingle antenna

WLAN host interface options: - SDIO v3.0 and backward compatible with SDIOv2.0host interfaces. up to 208 MHz clock rate in SDR104 mode

BT host digital interface: -UART (up to 4 Mbps)

Bluetooth Low Energy support

Physical interface

Display: 8/9/16 bits SLCD & 24 bits RGB LCD & 2 lanes MIPI

PWM x16 & TCU x8

I2C x5

MSC x1

NEMC 8/16bit

SPI x2

Smart card x1

UART x9

I2S x3

Analog MIC x1

Digital MIC x4

ADC x6

Headphone x1

SPDIF IN & SPDIF OUT

USB 2.0 OTG

Ethernet MAC: (RGMII)x1

Camera: (8/10 bit DVP & 8/10/12 bit raw VIC)& (2x2 lane MIPI& 4 lane MIPI)

temperature:

Working temperature: -40~85