1.
Solution introduction:
Halley5 core board is a dual-core high-performance, low-cost wireless LAN module based on X2000 design for IoT devices, with a maximum frequency of 1.2GHz and an internal integrated 1Gb LPDDR3, 750MHz. The core board also includes a 2Gb SPI NANDFlash, Wi-Fi IEEE 802.11 b/g/n/ac dual-band, Bluetooth 5.0 and Bluetooth Low Energy 2-in-1 module. It also provides a stamp hole interface with 144 pins for various peripheral interfaces, which can expand LCD, audio, camera, Ethernet, SD card, USB OTG, SPI, I2C, UART, PWM, NEMC, ADC etc.
The Halley5 core board can run the latest Linux kernel and TCP/IP stack. Equipped with high-performance XBurst CPU, supports hardware floating-point unit (FPU), SIMD accelerated instructions, and supports various algorithms such as speech recognition, image recognition, noise reduction, echo cancellation, and APE/FLAC decoding.
2.
Performance parameters:
Industry Classification : Smart Home
Delivery form : PCBA
Application scenarios: Can be widely used, such as wireless intercom, smart toys, smart gateway, smart home, etc.
● Dimensions: 38mm x52mm X 1mm
● CPU operating frequency: up to 1.2GHz
● Memory: 1G bits LPDDR3 (embedded in X2000)
● External storage: 2G bits SPI NAND Flash (compatible with SPI NOR Flash)
● Wi-Fi: Dual-band Wi-Fi 802.11 b/g/n/ac
● Bluetooth: Bluetooth 5.0 with BLE, 2.1 EDR
● Working voltage: DC 5V
● Wi-Fi and Bluetooth parameters
☆IEEE 802.11 b/g/n/ac dual-band radio
☆Bluetooth 5.0 with integrated class 1.5 PA
☆ Concurrent Bluetooth and WLAN operation, simultaneous BT/WLAN reception with asingle antenna
☆WLAN host interface options: - SDIO v3.0 and backward compatible with SDIOv2.0 host interfaces. — up to 208 MHz clock rate in SDR104 mode
☆BT host digital interface: -UART (up to 4 Mbps)
☆Bluetooth Low Energy support
● Physical interface
☆Display: 8/9/16 bits SLCD & 24 bits RGB LCD & 2 lane MIPI
☆PWM x16 & TCU x8
☆I2C x5
☆MSC x1
☆NEMC 8/16bit
☆SPI x2
☆Smart card x1
☆UART x9
☆I2S x3
☆Analog MIC x1
☆Digital MIC x4
☆ADC x6
☆Headphone x1
☆SPDIF IN & SPDIF OUT
☆USB 2.0 OTG
☆Ethernet MAC: (RGMII)x1
☆Camera: (8/10 bit DVP & 8/10/12 bit raw VIC)& (2x2 lane MIPI& 4 lane MIPI)
