MT29F2G08ABAEAWP:E-Perceptive Electronic Components

Features • Open NAND Flash Interface (ONFI) 1.0-compliant1 • Single-level cell (SLC) technology • Organization – Page size x8: 2112 bytes (2048 + 64 bytes) – Page size x16: 1056 words (1024 + 32 words) – Block size: 64 pages (128K + 4K bytes) – Plane size: 2 planes x 1024 blocks per plane – Device size: 2Gb: 2048 blocks • Asynchronous I/O performance – tRC/tWC: 20ns (3.3V), 25ns (1.8V) • Array performance – Read page: 25µs 3 – Program page: 200µs (TYP: 1.8V, 3.3V)3 – Erase block: 700µs (TYP) • Command set: ONFI NAND Flash Protocol • Advanced command set – Program page cache mode4 – Read page cache mode 4 – One-time programmable (OTP) mode – Two-plane commands 4 – Interleaved die (LUN) operations – Read unique ID – Block lock (1.8V only) – Internal data move • Operation status byte provides software method for detecting – Operation completion – Pass/fail condition – Write-protect status • Ready/Busy# (R/B#) signal provides a hardware method of detecting operation completion • WP# signal: Write protect entire device

• First block (block address 00h) is valid when shipped from factory with ECC. For minimum required ECC, see Error Management. • Block 0 requires 1-bit ECC if PROGRAM/ERASE cycles are less than 1000 • RESET (FFh) required as first command after power-on • Alternate method of device initialization (Nand_Init) after power up (contact factory) • Internal data move operations supported within the plane from which data is read • Quality and reliability – Data retention: 10 years – Endurance: 100,000 PROGRAM/ERASE cycles • Operating voltage range – VCC: 2.7–3.6V – VCC: 1.7–1.95V • Operating temperature: – Commercial: 0°C to +70°C – Industrial (IT): –40ºC to +85ºC • Package – 48-pin TSOP type 1, CPL2 – 63-ball VFBGA Notes: 1. The ONFI 1.0 specification is available at www.onfi.org. 2. CPL = Center parting line. 3. See Electrical Specifications – Program/Erase Characteristics for tR_ECC and tPROG_ECC specifications. 4. These commands supported only with ECC disabled.

Technical Parameters

Part Status	Active
Memory Type	Non-Volatile
Memory Format	FLASH
Technology	FLASH - NAND
Memory Size	2Gb (256M x 8)
Memory Interface	Parallel
Write Cycle Time-Word,Page	-
Voltage-Supply	2.7V ~ 3.6V
Operating Temperature	0°C ~ 70°C (TA)
Mounting Type	Surface Mount
Package/Case	48-TFSOP (0.724", 18.40mm Width)
Supplier Device Package	48-TSOP I
Base Product Number	MT29F2G08
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level(MSL)	3 (168 Hours)
REACH Status	REACH Unaffected
ECCN	3A991B1A
HTSUS	8542.32.0071

Reviews

5 / 5

1 Starts 0%

2 Starts 0%

3 Starts 0%

4 Starts 0%

5 Starts 100%

Reviews

Please rate the product !

5 / 5

1 Starts 0%

2 Starts 0%

3 Starts 0%

4 Starts 0%

5 Starts 100%

Reviews

Please rate the product !

Most packages to United Kingdom arrive in 48 hours. This is the transit time from our distribution center in the United States, and customs clearance may impact the time it takes to receive your package.

GBP Currency

Free delivery on orders to United Kingdom of £33 or more.
A delivery charge of £33 will be billed on orders less than £33.

USD Currency

Free delivery on orders to United Kingdom of $50 USD or more.
A delivery charge of $50 USD will be billed on orders less than $50 USD.

Shiping Type	Ship Fee	Lead Time
	$20.00-$40.00 (0.50 KG)	2-5 days
	$20.00-$45.00 (0.50 KG)	2-5 days
	$20.00-$40.00 (0.50 KG)	3-7 days
	$25.00-$45.00 (0.50 KG)	5-14 days

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

1.We provide 90 days warranty.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.

FAQ:

Q: How does Perceptive guarantee that MF10CN is the original manufacturer or agent of MAX?

We have a professional business development department to strictly test and verify the qualifications of MAX original manufacturers and agents. All MAX suppliers must pass the qualification review before they can publish their MF10CN devices; we pay more attention to the channels and quality of MF10CN products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.

Q: How to find the detailed information of MF10CN chips? Including MAX original factory information, Active Filter application, MF10CN pictures?

You can use Perceptive's intelligent search engine, or filter by Active Filter category, or find it through MAX brand manufacturer page.

Q: Are the MAX's MF10CN price and stock displayed on the platform accurate?

The MAX's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for MF10CN, it is recommended to confirm the order with Perceptive salesperson or online customer service before payment.

Q: What forms of payment can I use in Perceptive?

TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.

Q: How is the shipping arranged and track my package?

Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.

Q: What is the process for returns or replacement of MF10CN?

All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the MF10CN we delivered, we will accept the replacement or return of the MF10CN only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of MF10CN.
(3)The MF10CN is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations

Q: How to contact us and get support, such as MF10CN datasheet pdf, MF10CN pin diagram?

Need any After-Sales service, please feel free contact us: sales@Perceptive-ic.com